My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Recently Viewed Products
Community Poll
Product Description
SetCoat® (AquaBond™) is a product that was designed specifically to work as a basecoat for all your decorative finishing work with Aquacreme™ or AquaGlaze®. It is an excellent furniture refinishing product as well, as you do not have a strip off the old paint. The material has superb bonding and sealing qualities. SetCoat® material is available in off white, white (which can be tinted with FauxCreme®Color) black, 6 metallic colors and 13 custom colors. SetCoat® is the recommended sub-straight for producing classic decorative finishes. It allows for the slow drying of AquaCreme™ , AquaGlaze® and other materials in the Aqua™ System.
In addition, the material may be used for both interior and exterior applications. Unlike common latex paints, the high grade, proprietary resin used in the manufacturing of SetCoat® allows the material to be hand rubbed to a satin patina, or wet sanded to a feather edge. Amazingly, SetCoat® is low in VOC content and friendly to the environment.
SetCoat® is excellent for furniture and refinishing mica. Thoroughly clean the old surface before applying the SetCoat® material (For cabinets, furniture, and mica finishes, sand the old surface with 220 grit roll, or spray. For second or multiple coats, allow the SetCoat® two coats.) If the SetCoat® is sprayed, it may be thinned with water if desired, but it is not necessary with most spray painting equipment. For roll-on applications, use high quality sponge rollers. Finish roll in one direction, especially with metallic SetCoat®™. For brush applications, use a fine quality brush made for water base material. Finish brush in one direction with light brush pressure.
Available in a wide selection of colors, metallics, as well as a tinting base.
Covers Approximately 400 sq ft per gallon
Sold in quarts and gallons.
In addition, the material may be used for both interior and exterior applications. Unlike common latex paints, the high grade, proprietary resin used in the manufacturing of SetCoat® allows the material to be hand rubbed to a satin patina, or wet sanded to a feather edge. Amazingly, SetCoat® is low in VOC content and friendly to the environment.
SetCoat® is excellent for furniture and refinishing mica. Thoroughly clean the old surface before applying the SetCoat® material (For cabinets, furniture, and mica finishes, sand the old surface with 220 grit roll, or spray. For second or multiple coats, allow the SetCoat® two coats.) If the SetCoat® is sprayed, it may be thinned with water if desired, but it is not necessary with most spray painting equipment. For roll-on applications, use high quality sponge rollers. Finish roll in one direction, especially with metallic SetCoat®™. For brush applications, use a fine quality brush made for water base material. Finish brush in one direction with light brush pressure.
Available in a wide selection of colors, metallics, as well as a tinting base.
Covers Approximately 400 sq ft per gallon
Sold in quarts and gallons.